Your clothes will get wet, your laundry schedule will be delayed, and water will collect inside the drum if your washing machine refuses to spin. Don’t worry if your Samsung washing machine isn’t spinning; many of these problems are diagnosable and repairable at home without the assistance of a professional.
We’ll go over the most frequent causes of your Samsung washer not spinning, how to troubleshoot it step-by-step, and when to call a technician in this comprehensive USA homeowner’s guide for 2025.
Typical Causes of a Samsung Washer Not Spinning
There are several reasons why your Samsung washer might not spin, ranging from straightforward overloading to mechanical or electrical issues. These are the main reasons:
1. Unbalanced Weight
The sensors in your Samsung washer will recognize an uneven load and halt the spin cycle to avoid damage.
2. The washer is not level
An unbalanced load error and spinning can be caused by an uneven washer on an unstable floor.
3. A malfunctioning or clogged drain pump
The washer won’t go into the spin cycle if it isn’t draining correctly.
4. Drive belt damage
The drum may stop spinning due to a loose or broken drive belt.
5. A broken door switch or lid
For safety, the washer won’t spin if it doesn’t detect that the door or lid is securely closed.
6. Rotor or Motor Control Board Problem
Drum rotation may be halted by motor issues, particularly in direct-drive models.
7. The spin setting is incorrect
Sometimes it’s as easy as turning off the spin setting or putting it on a low-speed cycle.
Equipment & Things You Might Need
Flathead and Phillips screwdrivers
Wren with adjustment
A small bucket or towel (for water drainage)
A flashlight
Multimeter (if required for electrical testing)
Step-by-Step Instructions for Fixing a Samsung Washing Machine That Isn’t Spinning
Here’s a dependable, do-it-yourself method for getting your washer running again.
1. Verify the load balance
Spread the clothes evenly around the drum after opening the washer.
Avoid mixing heavy towels with lightweight garments.
To balance the drum for light loads, add a few extra items.
Next, perform a spin cycle test.
2. Make sure the washer is level
To make sure the washer is sitting evenly, use a level tool or app.
If necessary, adjust the washer’s feet to stabilize it.
Unbalanced load errors and stop spinning can result from uneven placement.
3. The drain filter should be cleaned
The spin cycle may be stopped by improper draining caused by a clogged drain filter.
On the lower front of the washer, open the small access panel.
Put a shallow container and a towel underneath.
To release the water, unscrew the drain filter cap.
Under running water, remove and clean the filter.
Put the filter back in and fasten it.
Do another test run.
4. Check the Drain Hose
Examine the drain hose for obstructions or kinks.
Make sure it is only 6 to 8 inches deep and not pushed too far into the standpipe.
If required, take out the hose and rinse it with hot water.
5. Check the door lock and lid switch
The washer won’t spin if the door isn’t locked firmly.
Listen for the click as you open and shut the door firmly.
Use a multimeter to check for continuity if you think your door lock is broken.
If the door lock assembly is broken, replace it.
6. Examine the drive belt, if applicable
After unplugging the washer, take off the rear panel.
Verify that the drive belt is:
Unrestrained
Broken
Off the pulley entirely
If the belt is worn, reposition it or replace it.
7. Examine the advanced control board or motor
If you are still unable to spin your Samsung washer:
Pay attention to any odd humming or buzzing noises.
Check for burn marks on the control board.
Use a multimeter to test motor resistance.
It is best to contact a Samsung-certified technician if it is defective.
Typical Samsung Washer Error Codes Associated with Spin Problems
Error Code: UB or UE5C or SC indicates an unbalanced load.Issue with drainage dE or DCDoor not closed correctly 3E Error related to the motor
For more codes, consult your Samsung handbook.
How to Avoid Spin Issues with Samsung Washers
Avoid single heavy items and properly balance loads.
Check your washer twice a year to make sure it is level.
Regularly clean the hose and drain filter.
Too much suds can stop spinning, so use the right amount of detergent.
For belt-driven models, check the drive belt once a year.
Make use of spin cycles that are suitable for the type of load.
When to Speak with an Expert
If
Error codes are not going to clear
The rotor, control board, or motor is broken.
You cannot replace the drive belt on your own.
After troubleshooting, the washer still won’t spin.
Average prices for Samsung washer repairs in the USA:
$125 to $350, depending on the problem and where you live.
In conclusion
Although it can be annoying, a Samsung washing machine that refuses to spin can usually be fixed with some simple troubleshooting. You can usually get your washer’s spin cycle back without expert assistance by checking drainage and load balance as well as belts and switches.
Do not hesitate to contact a certified Samsung technician if deeper electrical or motor issues are suspected in order to prevent expensive water damage or malfunctions.